how to clean kitchen air filter

When replacing the filters with the lifting tool, make sure to note.Use a brush and give a proper scrub to get rid of any grease, even minute traces that might be there in the corners.For a deeper cleaning, fill a sink with one part water and one part white vinegar, and then allow your hvac filter to soak in the solution for one hour.The majority of filters should easily pop or slide out.Make sure the kitchen chimney is turned off before you start cleaning the filter.

After a good soak, take your brush and scrub gently.You cannot clean a hepa filter by using something like a vacuum because the particles are trapped not only on the surface of the filter, but also deep inside the media, bloemer says.Wipe the fan blades to remove any grease and dirt.Towel and air dry the filter.Clean one side of the kitchen air filter, then the other side.

Scrub the filter with a brush to remove all the dirt and grease.Now put the filter under hot water in a sink.Then out the filters into the sink and allow them to soak for at least ten minutes.Allow the filter to rest for an hour.Most filters should easily slide or pop out of the underside of the hood.

Do not use abrasive cleaners, cloths, or cleaners with chlorine.For stubborn areas, add extra washing up liquid directly to the brush.Submerge the filter into the solution and let it soak for at least 15 minutes.If you get distracted, try to remove it before the water cools entirely and the grease resettles on the filter.Wipe it down with a clean cloth or paper towels.

Wash the detergent off, along with the grease.Place the filters into the water.No need to scrub now;If there's anything stubborn you can make a paste of vinegar and bicarbonate of soda to further break down the grease and get a clean extractor filter.